Loading page content.
One ISP-registered address, leased to you alone, with unmetered bandwidth. Built for identities that have to be recognised tomorrow.
Starting price
$3.50/IP/wk
per IP, week, from 1 IP. Falls to $2.28/IP/wk at 250 IPs.
Every account starts with 50 MB of free residential bandwidth. No card is required to test the network.
How it works
A static residential — or ISP — proxy is a real address inside a consumer ISP's allocation that is hosted in a datacenter rather than a house. It resolves as residential to every lookup a target performs, and it has the uptime and throughput of a rack, which is the combination a rotating pool of home connections cannot offer.
Each address is announced by a consumer ISP — Comcast, Vodafone, Orange — and leased to a single customer, so its reputation history is yours alone. Bandwidth is unmetered: the weekly rate is the entire bill no matter how many terabytes pass through. Blocked addresses are swapped twice per lease week at no charge.
At checkout you name a country and, optionally, a city or a specific ASN. We allocate an address from the ISP block reserved for that point of presence and bind it to your account for the term of the lease.
Nothing else routes through that address while you hold it. Its reputation history is entirely the product of your own traffic, which is what makes an ISP lease predictable in a way a shared pool never is — nobody else can get it blocked on Tuesday.
There is no gateway hop and no pool lookup. Your client points at the leased address directly, which removes both a network hop and the variance that comes with matching against live peers.
If an address picks up a block that makes it useless to you, request a replacement from the dashboard or the API. Two swaps per address per lease week are free, the replacement is provisioned in the same city, and it inherits the remaining term.
The honest limitation: one address is one identity. A crawl that would spread over 500 rotating exits will be rate-limited running through a single static IP no matter how residential it looks. Static residential buys depth of identity, not breadth of coverage.
Volume ladder
Tiers are a step function, not interpolation: the greatest break at or below your quantity wins and every unit bills at that rate. They apply automatically at checkout — there is no code to enter and nothing to negotiate.
| Quantity | Unit price | Saving | Order total | Order at this tier |
|---|---|---|---|---|
| 1 IP and above | $3.50/IP/wk | Entry rate | $3.50 | Order |
| 5 IPs and above | $3.33/IP/wk | Save 5% | $16.65 | Order |
| 10 IPs and aboveMost popular | $3.15/IP/wk | Save 10% | $31.50 | Order |
| 25 IPs and above | $2.98/IP/wk | Save 15% | $74.50 | Order |
| 50 IPs and above | $2.80/IP/wk | Save 20% | $140.00 | Order |
| 100 IPs and above | $2.63/IP/wk | Save 25% | $263.00 | Order |
| 250 IPs and aboveBest value | $2.28/IP/wk | Save 35% | $570.00 | Order |
Totals are what checkout charges for exactly that quantity. Buying past a break lowers the rate on every unit, not only the ones above it. Price a custom quantity in the calculator.
Specification
Everything a reader needs to decide whether this product fits their stack, on one screen and in one table.
| Property | Value |
|---|---|
| Rotation | None. The address is fixed for the life of the lease |
| Sticky duration | The whole term. Identity survives process restarts, redeploys and week-long gaps |
| Targeting | Country, city or ASN, chosen at checkout and immutable for the lease |
| Protocols | HTTP and HTTPS via CONNECT on port 8080 and 8443, SOCKS5 on 1080, direct to the leased address |
| Concurrency | Unlimited — you are the only tenant on the address and the port is not shared |
| Bandwidth policy | Unmetered. The weekly rate is the entire bill however many terabytes cross it |
| Authentication | Username and password, plus an optional whitelist of up to 10 source addresses |
| Order size | 1 IP to 500 IPs per order, in steps of 1 |
Integration
There are no targeting segments in the username, because the address is the targeting. It was chosen when the lease was cut and cannot change without a new lease — which is the whole point of the product.
fp_a41c9dfp_a41c9d
The credential id for this lease. Issue a second credential on the same address to give a teammate access you can revoke independently.
198.51.100.24
The leased address itself. It is what your client connects to and what the target sees; there is no gateway in between.
No -country segment
Country, city and ASN were fixed when the address was allocated. A username segment cannot move a physical allocation.
No -session segment
There is no pool to pin. Every request from this credential leaves from the same address until the lease ends.
# Run this on Monday and again on Friday: the same address answers.
curl -x http://fp_a41c9d:[email protected]:8080 \
-s https://api.fleetproxy.com/v1/ipTargeting
Everything is decided once, at checkout, and then held. That is the trade: no runtime flexibility, complete stability.
| Control | How it is set | Notes |
|---|---|---|
| Country | Checkout selection | Chosen from the countries with ISP inventory listed below. |
| City | Checkout selection | Available where the ISP block is city-specific; otherwise the address lands in the country's main point of presence. |
| Network | Checkout selection | Pin a named consumer ISP by ASN when a target is known to score a specific carrier. |
| Change after purchase | New lease required | A replacement address arrives in the same city as the original. Moving country means leasing in the new country. |
ISP allocations are held in the markets below. A country not listed here can still be reached through the rotating residential pool.
See every country and city with live inventory — counts are the addresses published for that market, not a global total repeated on every page.
Use cases
Four workloads where this product is the right answer rather than a workable one.
Platforms bind an account's trust score to the addresses it logs in from. An address that never changes reads as a person with a fixed home connection; an address that changes every session reads as a compromise, and triggers verification.
One address per profile, held for months, is the arrangement that survives. Sharing a rotating pool across profiles is how a network of accounts gets linked and actioned together.
Marketplace sellers running several storefronts need each one to originate from a distinct, stable, residential-looking connection. Unmetered bandwidth means bulk listing uploads and image transfers cost nothing extra.
Any workflow that keeps a browser session warm for hours — internal tools, partner portals, dashboards that log you out on IP change — wants a lease rather than a pool.
Browse every use case for the full breakdown, including the products that suit each one.
Compare
The two nearest products in the catalogue, and the conditions under which each of them is the better purchase. Buying the wrong class costs more than buying the wrong volume.
$2.65/GB
Choose rotating residential instead if you need breadth rather than depth. Collecting ten thousand pages needs many identities, not one durable one, and metered bandwidth across a large pool is far cheaper than leasing enough static addresses to avoid rate limits.
$2.00/IP/wk
Choose datacenter IPv4 instead if the far end does not check the ASN. You get the same dedicated, unmetered, never-rotating arrangement on a 10 Gbps port for substantially less per week — the entire premium here is the ISP registration, so do not pay it where nobody reads it.
Compare all eight proxy types on identity, rotation, targeting and billing, or price them side by side.
Questions
Pulled from the help center and filtered to the questions this product actually raises.
You can add an IP whitelist to any credential, but password authentication is still required alongside it — the whitelist narrows who may use the credential, it does not replace authentication. Whitelists are per-credential rather than per-account, so adding an address to one credential does not add it to the others. A changed office IP or a new CI runner is a common cause of sudden 407s.
Residential IPs are addresses assigned by consumer ISPs to real subscriber connections, so targets see an ordinary visitor; they cost more and add 200–900ms of latency. Datacenter IPs come from hosting providers, are roughly twenty times cheaper per gigabyte and much faster, but are trivially identifiable and filtered by any site that cares. Mobile IPs are carrier-assigned 4G/5G addresses shared by thousands of subscribers, which makes them the hardest to block and the most expensive. Start with datacenter on undefended targets and residential everywhere else.
Roughly 30 million residential addresses across 195 countries, plus dedicated static residential, mobile and datacenter inventory. Coverage is not uniform: the locations pages show live IP counts per country and city so you can check a specific market before ordering rather than after. Anything under 500 IPs in a pool is flagged, because a pool that small will repeat addresses inside a large crawl.
Something not covered here? Read the full help center or ask the support team.
Start on 50 MB of free residential bandwidth, then buy from $3.50/IP/wk. Volume tiers apply automatically, and there is no contract to sign.
No card required for the trial. Cancel or downgrade at any time.